Power Terminals Of The Main Circuit - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive

3.2.4 Power Terminals of the Main Circuit


When wiring, ensure that the power switch is off. Otherwise, you may get electric shock.

The wiring personnel should be one professional. Otherwise, the equipment or personal
body may be damaged.

The connection to the ground should be reliable. Otherwise, it may result in an electric
shock or a fire.

Ensure that the rated value of the power supply is consistent with the one of the AC drive.
Otherwise, the AC drive may be damaged.

Ensure that the rated capacity of the motor matches the one of the AC drive. Otherwise, it
may result in the damage to the motor or the protection of the AC drive.

Do not connect the power supply to U,V,W terminals. Otherwise, it may result in the damage
to the AC drive.

Do not connect the braking resistance to P+ and P- terminals of the DC bus directly.
Otherwise, it may result in a fire alarm.
Figure 3- 10
CDE360-4T（5T）3R7G/5R5L
Figure 3-9
CDE360-4T（5T）0R7G/1R5L~2R2G/3R7L
P + P - R S
-
Chapter 3 Mechanical and Electrical Installation
Danger
CDE360-4T（5T）5R5G/7R5L～018G/022L
T U V W
P B
29
-
Figure 3-11