Group F0: Protection - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive
Eb.28
Simple brake
frequency
Eb.29
Simple brake
time

Group F0: Protection

F0.00
Under voltage
threshold
Voltage Class(V)
Single-phase 220
Three-phase 220
Three-phase 380
①
F0.01
Over voltage
threshold
Voltage Class(V)
Single-phase 220
Three-phase 220
Three-phase 380
F0.02
Input phase loss
protection
F0.03
Output phase
loss protection
Range: 0.00~b0.00
Unit: Hz
In the process of stopping,Y/T terminal assigned with function '45: Simple
brake control' will be ON for the time Eb.29 set when the AC drive output
frequency is lower than Eb.28.
Range: 0.0~3000.0
Unit: Sec
Set Eb.29 to a nonzero value will enable simple brake function.
Range: Model dependent
It is used to set the undervoltage threshold for the drive. The default value
and range of different classes are list in the following table.
Table 6- 17 Undervoltage threshold in different voltage class
Default(V) Range(V)
200 180 - 280
200 180 - 280
350 280 - 550
Range: Model dependent
It is used to set the overvoltage threshold for the drive. The default value
and range of different classes are list in the following table.
Table 6- 18 Overvoltage threshold in different voltage class
Default(V) Range(V)
380 360 - 410
380 360 - 410
780 630 - 800
Range: 0~1
0: Disable If input phase loss then drive will not perform protecting action.
1: Enable If input phase loss then drive will perform protecting action
according to F0.19(Unit's digit).
Note: This protection is valid only in the AC drives which power are larger
or equal than 11KW(G type).
Range: 0~1
0: Disable If out phase loss then drive will not perform protecting action.
1: Enable If input phase loss then drive will perform protecting action
according to F0.19(Ten's digit).
Chapter 6 Parameters Description
Default: 2.00
Default: 0.0
Default: Model dependent
Voltage Class(V)
Three-phase 480
Three-phase 690
Three-phase 1140
Default: Model dependent
Voltage Class(V)
Three-phase 480
Three-phase 690
Three-phase 1140
Default: 1
Default: 1
Default(V) Range(V)
450 350 - 600
650 500 - 800
1350 1100 - 1500
Default(
Range(V)
V)
880 660 - 900
1200 1100 - 1300
2400 2300 - 2500