Password And Parameter Setting - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive

4.7 Password and Parameter Setting

The AC drive provides the user password protection function.
When H0.00 is set to a non-zero value, the value is the user password. Set H0.00 to the
same value for the 2 time in a row,and the password will be set successfully.Meanwhile, the LED
will display 'P.SEt' and the LCD screen will display 'Setting password succeed'.The user password
will be active if there is no keypad operation in 5 minutes.
If a long line '----' displays on the LED screen when you press PRG, 'Please enter the
password' may show on the LCD screen, and then the correct user password needs to be
entered.Otherwise you will see non parameter.The user password will be active again if there is
no keypad operation 5 minutes after entering the correct password.
Set H0.00 to zero for the 2 time in a row,and the password will be cleared.Meanwhile, the
LED will display 'P.CLr' and the LCD screen will display 'Clear password succeed'.
Example 1: Set the user password of H0.00 to "0003"(digit with underline means it's in an edit
state).
Example 2: Set parameter value from "50.00" to "100.00"(digit with underline means it's in an
edit state)..
50.00
Example 3: Set parameter value from "100.00" to "1.00"(digit with underline means it's in an
edit state).
100.0
Figure 4- 4 Set user password example
Rotary knob
Shift
+
50.00
Figure 4- 5 Parameter edit example 1
Rotary knob
Shift
—
100.0
Figure 4- 6 Parameter edit example 2
Chapter 4 Operation,Display and Application
Shift
100.0
00.00
Shift
001.0
43
- -
Enter
Enter
01.00