Keypad Display - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive

4.4 Keypad Display

LED screen can only display 4 digits. If the parameter value is more than 4 digits, the display
method is shown in the table below.
Note: If the parameter can be modified, each digit can be switched by SHIFT key.
Actual value
1234.5
123.45
12.345
0.1234
0.0034
0.0004
Common LDE display sign.
Sign
8.8.8.8.
dEFt
Load
Copy
TUNE
P.SEt
P.CLr
Tips:
The Keypad with LCD screen can display two monitor parameters at the same time.

LCD screen can display 2 lines of characters.

Move the cursor to first line on LCD screen, press SHIFT key to select the first monitor
parameter.

Press ENTER key the move the cursor the second line,press SHIFT key to select the
second monitor parameter.
Table 4- 3 Five digits shown method of LED screen
Display value
12345 1234.
1234
123.4
12.34
0.123
0.003
0.000
Table 4- 4 Common LDE display sign
AC drive is in initialization after power on.
LCD screen shows non character.
Being restoring default settings of the parameters.
LCD screen will show 'Restoring default setting'.
Being uploading the parameters. LCD screen will show
'Uploading'.Please wait for a few minutes.
Being downloading the parameters. LCD screen will
show 'Downloading'.Please wait for a few minutes.
The motor parameters is being auto-tuning.
LCD screen will show 'Motor Auto-tuning'. Please wait
for a few minutes.
User password is set successfully.
User password is cleared successfully.
Chapter 4 Operation,Display and Application
After press the SHIFT key
2345
234.5
23.45
2.345
1234
0034
0004
Meaning
40
- -