Group H0: System Parameters - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive

Group H0: System Parameters

H0.00
User password
H0.01
LED display
running
parameters 1
H0.02
LED display
running
parameters 2
H0.03
LED display stop
parameters
Range: 0000~9999
If it is set to any non-zero number, the password protection function is
enabled. After a password has been set and taken effect, you must enter
the correct password in order to enter the menu. If the entered password
is incorrect you cannot view or modify parameters.
You can set the user password successfully when you set the same
value(none zero) two times to H0.00. If the user password has been set
successfully then the LED will display "P.Set".
If you want to clear the user password then set zero the H0.00 two times.
If you clear the user password successfully then the LED will display
"P.CLr".
Range: 0~65535
In the stop or running state, you can press shift key on the keypad to
display monitor parameters. Whether parameters are displayed is
determined by the binary bits of values converted from the values of
H0.01~H0.03 in the decimal format.
Bit0: running freq(1)
Bit3: output current(8)
Bit6: output power(64)
Bit9: AI3 voltage(512)
Bit11: Y terminal status(2048)
Bit14: PID feedback(16384)
Range: 0~2047
Bit0: FI input freq(1)
Bit1: Linear speed(2)
Bit2: Load speed(4)
Bit3: Length value(8)
Bit4: Remaining running time(16)
Bit5: Main frequency A display(32)
Range: 0~65535
Bit0: setting freq(1)
Bit3: Y terminal status(8)
Bit6: AI3 voltage(64)
Bit9: PID feedback(512)
Bit12: Length value(4096)
Chapter 6 Parameters Description
Default: 0000
Default: 31
Bit1: setting freq(2)
Bit4: output voltage(16)
Bit7: AI1 voltage(128)
Bit10: X terminal status(1024)
Bit12: PLC stage(4096)
Bit15: count value(32768)
Default: 0
Bit6: Auxiliary frequency B display(64)
Bit7: FO output freq(128)
Bit8: Feedback freq(256)
Bit9: motor speed (512)
Bit10: Multi-Pump Control status words(1024)
Default: 3
Bit1: Dc-link voltage(2)
Bit4: AI1 voltage(16)
Bit7: FI input freq(128)
Bit10: PLC stage(1024)
Bit13～Bit15: reverse
Bit2: Dc-link voltage(4)
Bit5: output torque(32)
Bit8: AI2 voltage(256)
Bit13: PID setting(8192)
Bit2: X terminal status(4)
Bit5: AI2 voltage(32)
Bit8: PID feedback(256)
Bit11: pulse count(2048)