Group C5 : Virtual Digital Input/Output - Canworld CDE360 Series Manual

CDE360 Vector Control AC Drive
:
Group C5 Virtual Digital Input/Output
Virtual terminals can be useful in some applications such as input terminal signal is
determined by output terminal.
User can connect the virtual outputs with virtual inputs without actual wires. The usage
method is similar with actual terminal.
①
C5.00
VX1 function
①
C5.01
VX2 function
①
C5.02
VX3 function
①
C5.03
VX4 function
C5.04
VX active state
mode selection
C5.05
Digital setting of
VX active state
①
C5.06
Active mode for
AI as VX input
Range: 0~58
Same As C0.01. Refer to Tab6-C1.
Range: 0~58
Same As C0.01. Refer to Tab6-C1.
Range: 0~58
Same As C0.01. Refer to Tab6-C1.
Range: 0~58
Same As C0.01. Refer to Tab6-C1.
Range: 0000~4444
This defines signal source for virtual digital input.
0: VYn
 VYn=1,VXn function is active.
 VYn=0, VXn function is inactive.
 n = 1~4
Unit's digit: VX1
Ten's digit: VX2
Range: 0000~1111
When C5.04 = 1,VX1~VX4 input status are determined by C5.05.
0: active
Unit's digit: VX1
Ten's digit: VX2
Range: 000~111
When C5.04 select AI as the input for VX, AI level defines as high level if
AI voltage is greater than the setting of C5.07, AI level defines as low level
if AI voltage is less than the setting of C5.08.
This parameter defines the active status is high level or low level.
0: high level
1: low level
Unit's digit: AI1
1: inactive
Hundred's digit: VX3
Thousand's digit: VX4
Ten's digit: AI2
Chapter 6 Parameters Description
Default: 0
Default: 0
Default: 0
Default: 0
Default: 1111
1: C5.05
2: AI1
3: AI2
4: AI3
Hundred's digit: VX3
Thousand's digit: VX4
Default: 0000
Default: 000
Hundred's digit: AI3