Eps (Ethernet Protection Switching) - Transition Networks SM TAT4X Series Web User Manual

Transition Networks
EPS (Ethernet Protection Switching)
Ethernet (Linear) Protection Switch instances are configured here. EPS (Ethernet Protection Switching) is defined
in ITU/T G.8031.
Delete: This box is used to mark an EPS for deletion in next Save operation.
EPS ID: The ID of the EPS. Click on the ID of an EPS to enter the configuration page. The range is 1‐100.
Domain: Port: This will create a EPS in the Port Domain. 'W/P Flow' is a Port.
Architecture: can be either:
Port: This will create a 1+1 EPS.
Port: This will create a 1:1 EPS.
W Flow: The working flow for the EPS ‐ See 'Domain'.
P Flow: The protecting flow for the EPS ‐ See 'Domain'.
W SF MEP: The working Signal Fail reporting MEP.
P SF MEP: The protecting Signal Fail reporting MEP.
APS MEP: The APS PDU handling MEP.
Alarm: There is an active alarm on the EPS.
Buttons
Add New Entry: Click to add a new EPS entry.
Auto‐refresh: Click to automatically refresh the page every 3 seconds.
Refresh: Click to refresh the page immediately.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
33786 Rev. A
●
= an active alarm on the EPS.
https://www.transition.com
SMxxTAT4Xx Web User Guide
●
= no active alarm on the EPS.
Page 259 of 340