Table of Contents
Advertisement
2-4
Standard Roll Feed
2.4
Programming with the BTV04
Selection Menu
Note:
The DKC programming module must be set to drive address
05.
Rotary Switch S3
Fig. 2-3: Setting the Drive Address
After the BTV 04 has been switched on, the following appears on the dis-
play.
Roll Feed
F1 = length and speed
F2 = item number
F3 = tool selection
F4 = drive information
F5 = I/Os
F6 = operating mode
Help = diagnoses
Shift + Help = service
Fig. 2-3: Selection menu
Since only six lines can be simultaneously displayed, the three lower sec-
tions of the text can only be reached by scrolling with
The relevant submenu can be called up by pressing the specified F-key or
scrolling with the arrows and then pressing the „OK key". The return from
one menu back to the previous one is possible with the „ESC key". With
the „Main menu" key the user returns immediately to the selection menu.
All keys that have a function in a menu are illuminated.
H1
S1
S3
S2
0
0
0
0
Rotary Switch S2
Drive Address
set to: 05
Abb023_BTV_ELW_en.FH7
DOK-SUPPL*-BTV04*ELW**-AW01-EN-P
Application
NH\V
Hide quick links:
Advertisement
Table of Contents
