Connector Sub Plate - Epson ProSix S5 Series Manual

3.6 Connector Sub Plate

Remove the bolts, and then remove the Connector Sub Plate.
Tool: Hexagonal wrench (width across flats: 3 mm)
Hexagon socket head cap bolts: 4-M4×10
Tightening torque 1.4 N·m (0.14 kg·m)
For Protection model
Remove the bolts, and then remove the Connector Sub Plate.
Remove the gasket, the spacer, and the seal washer together with the cover.
Tool: Hexagonal wrench (width across flats: 3 mm)
Hexagon socket head cap bolts: 4-M4×15
Tightening torque: 1.4 N·m (0.14 kg·m)
S5 Rev.5
Maintenance 3. Covers
95