Running Automated Sample Analysis - Thermo Scientific thermoscientific Vanquish UHPLC System Operating Manual

6.6.4

Running Automated Sample Analysis

Creating a Sequence via eWorkflows
Creating a Sequence via Sequence Wizard
UHPLC System
Operating Manual
Automated sample analysis with the chromatography system involves
creating and running a sequence. In a sequence, you determine how the
injections of a sample are analyzed and in which order they are
processed. Each injection of a sequence is processed by using an
instrument method, which defines the property values and timed
control commands for each module. For details how to create an
instrument method using the Instrument Method Wizard, refer to the
Help.
Chromeleon 7 supports two methods for creating a new sequence:
TIP
If no eWorkflows are available, you can create a new eWorkflow as
described in the Help. As an alternative, use the Sequence Wizard to
create the sequence.
• eWorkflows (preferred method)
eWorkflows provide a set of predefined templates and rules for
creating a new sequence.
• Sequence Wizard
1. On the Console, click the eWorkflows Category Bar.
2. In the Navigation Pane, click the eWorkflow name.
3. In the Work Area, click the instrument name, and then click Launch.
4. The eWorkflow Wizard guides you through the process. Complete
the steps in the wizard. For detailed information about a wizard
page, click the Help icon.
After you finish the wizard, the sequence is displayed in the Data
view of the Console.
1. On the Console menu bar, click Create.
2. The Sequence Wizard guides you through the process. Complete the
steps in the wizard. Specify the number of samples and/or
standards, the instrument method, processing method, and report
template that you want to use. For detailed information about a
wizard page, click the Help icon.
After you finish the wizard, the sequence is displayed in the Data
view of the Console.
6 • Operation
Page 95