IBM Flex System x440 Compute Node Installation And Service Manual page 558

4x CPU (Normal config)
Socket 3
CPU
2
Socket 4
CPU
3
( CPU 2 functional but socket 1 DMI path broken
Socket 3
CPU
3
Socket 4
CPU
2
Figure 4. Supported four CPUs configuration
Before you install a microprocessor and heat sink, complete the following steps:
1. Read "Safety" on page v and "Installation guidelines" on page 487.
2. If the compute node is installed in an IBM Flex System chassis, remove it (see
3. Carefully lay the compute node on a flat, static-protective surface, orienting the
About this task
The following notes describe the type of microprocessor that the compute node
supports and other information that you must consider when you install a
microprocessor:
546
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide
Socket 1
CPU
0
Socket 2
CPU
1
4x CPU
Socket 1
CPU
1
Socket 2
CPU
0
"Removing a compute node from a chassis" on page 489 for instructions).
compute node with the bezel pointing toward you.
Mezz 1
Mezz 2
DMI
PCH
SW
Mezz 3
Mezz 4
)
Mezz 1
Mezz 2
DMI
PCH
SW
Mezz 3
Mezz 4