IBM Flex System x440 Compute Node Installation And Service Manual page 115

40000077-00000000 Power capping was activated by user [arg1].
Explanation: The power capping control has been enabled.
May also be shown as 4000007700000000 or 0x4000007700000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0119
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000078-00000000 Power capping was deactivated by user [arg1].
Explanation: The power capping control has been enabled.
May also be shown as 4000007800000000 or 0x4000007800000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0120
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000079-00000000 Static Power Savings mode has been turned on by user [arg1].
Explanation: Static Power Savings mode turned on by user
May also be shown as 4000007900000000 or 0x4000007900000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0121
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000007a-00000000 Static Power Savings mode has been turned off by user [arg1].
Explanation: Static Power Savings mode turned off by user
May also be shown as 4000007a00000000 or 0x4000007a00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0122
40000077-00000000 • 4000007a-00000000
Chapter 6. Troubleshooting
103