806f0225-1f06ffff • 806f030c-2002ffff
CIM Information: Prefix: PLAT and ID: 0394
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
806f0225-1f06ffff
LOM2 has been disabled.
Explanation: This message indicates the LAN On Motherboard (LOM) 1 is Disabled.
May also be shown as 806f02251f06ffff or 0x806f02251f06ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0394
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
806f030c-2001ffff
Scrub Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Explanation: Memory error discovered during boot..(not a runtime error).
May also be shown as 806f030c2001ffff or 0x806f030c2001ffff
Severity: Error
Alert Category: Critical - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0136
SNMP Trap ID: 41
Automatically notify Support: Yes
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
806f030c-2002ffff
Scrub Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Explanation: Memory error discovered during boot..(not a runtime error).
May also be shown as 806f030c2002ffff or 0x806f030c2002ffff
Severity: Error
Alert Category: Critical - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0136
SNMP Trap ID: 41
Automatically notify Support: Yes
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
168
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide
Need help?
Do you have a question about the Flex System x440 Compute Node and is the answer not in the manual?
Questions and answers