IBM Flex System x440 Compute Node Installation And Service Manual page 235

806f060d-0400ffff Array [ComputerSystemElementName] has failed.
Explanation: The Drive 0 is part of an RAID array that is in the failed condition. To identify drives in the failed
array all member drives will report this message.
May also be shown as 806f060d0400ffff or 0x806f060d0400ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0176
SNMP Trap ID: 5
Automatically notify Support: Yes
User response:
v Replace the hard disk drives that are indicated by a lit status LED on the drive.
v Recreate the array.
v Restore data from backup.
806f060d-0401ffff Array [ComputerSystemElementName] has failed.
Explanation: The Drive 1 is part of an RAID array that is in the failed condition. To identify drives in the failed
array all member drives will report this message.
May also be shown as 806f060d0401ffff or 0x806f060d0401ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0176
SNMP Trap ID: 5
Automatically notify Support: Yes
User response:
v Replace the hard disk drives that are indicated by a lit status LED on the drive.
v Recreate the array.
v Restore data from backup.
806f060d-0402ffff Array [ComputerSystemElementName] has failed.
Explanation: The Drive 2 is part of an RAID array that is in the failed condition. To identify drives in the failed
array all member drives will report this message.
May also be shown as 806f060d0402ffff or 0x806f060d0402ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0176
SNMP Trap ID: 5
Automatically notify Support: Yes
User response:
v Replace the hard disk drives that are indicated by a lit status LED on the drive.
v Recreate the array.
806f060d-0400ffff • 806f060d-0402ffff
Chapter 6. Troubleshooting
223