IBM Flex System x440 Compute Node Installation And Service Manual page 278

806f090c-2581ffff • 806f0a07-0302ffff
806f090c-2581ffff [PhysicalMemoryElementName] on Subsystem [MemoryElementName] Throttled.
Explanation: This message is for the use case when an implementation has detected Memory has been Throttled. All
DIMMs. One of the DIMMs.
May also be shown as 806f090c2581ffff or 0x806f090c2581ffff
Severity: Warning
Alert Category: System - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0142
SNMP Trap ID: 22
Automatically notify Support: No
User response: Complete the following steps:
1. Check the CMM or FSM event log for any fan or cooling related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
4. Make sure that the DIMM baffles are in place.
5. If the problem persists and there are no other DIMMs with the same indication, replace the DIMM.
806f0a07-0301ffff CPU 1 is operating in a Degraded State.
Explanation: The processor is being throttled due to thermal or power conditions.
May also be shown as 806f0a070301ffff or 0x806f0a070301ffff
Severity: Warning
Alert Category: Warning - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0038
SNMP Trap ID: 42
Automatically notify Support: No
User response: Complete the following steps:
1. Check the CMM or FSM event log for any fan- or cooling-related issues or power-related issues..
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
806f0a07-0302ffff CPU 2 is operating in a Degraded State.
Explanation: The processor is being throttled due to thermal or power conditions.
May also be shown as 806f0a070302ffff or 0x806f0a070302ffff
Severity: Warning
Alert Category: Warning - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0038
SNMP Trap ID: 42
Automatically notify Support: No
User response: Complete the following steps:
266
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide