Piper Malibu PA-46-310P Pilot Operating Handbook page 427

SECTION 9
SUPPLEMENT 9
PIPER AIRCRAFT CORPORATION
PA-46-310P, MALIBU
(4) AUTOPILOT NAV SELECT
Switch Positions
NAV/LORAN A/P NAV I
SW
NAV 2 A/P
Selections
SW
NAV
A/P NAV I
NAV #1 coupled to A/P
Displayed on H.S.l.
NAV A/P NAV 2 NA V #2 coupled to A/ P
displayed on NAV #2 indicator
LORAN
•
LORAN coupled to A/ P displayed
on H.S.I. (Blue Indicator light)
• When the NAV /LORAN switch is in the Loran mode the A/PNAV I/
NA V 2 A/ P autopilot coupling switch is inactive.
(c) NAVIGATION DISPLAYS
The Loran C System drives the pilot's HSI display when manually
selected by the NAV /LORAN switch. This configuration is
annunciated by a mode light adjacent to the HSI. The HSI will only
display left or right course information, to/from flags and a Off/
Warning flag indication from the Tl 9100. The course selector
pointer must be manually set to the Loran C course. (Actual course
cannot be determined on the HSI by rotating the course selector
pointer).
When Loran has been selected for display on the HSI, the bearing
pointer will continue displaying the bearing to a previous selected
u
V
VOR or RNAV waypoint or NOB. Caution must be used in noting
V
that the pointer will not indicate the bearing to the Loran waypoint.
I
REPORT: VB-1100
9-86, 4 of 6
ISSUED: APRIL 30, 1984
REVISED: APRIL 1, 1987