Piper Malibu PA-46-310P Pilot Operating Handbook page 348

BENDIX/KING
SECTION 4
NORHAL PROCBDUBBS
E. VERTICAL SPEED AND ALTITUDE SELECTOR OPERATION (IF
INSTALLED)
1. Vertical Speed Select
a. VERTICAL SPEED SELECI' knob - PULL small knob to
the "OUT" position.
**************************
VARNING
*****************************
VERIFY UNIT IS DISPLAYING VERTICAL SPEED SELECT VINDOV PRIOR TO
INITIATING ANY CHANGE IN THE SBLECl'BDVBRTICAL SPEED VALUE.
****************************************************************
b. VERTICAL SPEED SBLECI' knob - ROTATB until desired
vertical speed is displayed.
c. VERTICAL
SPEED MODE
(ENG) button - PUSH to engage
the Vertical Speed Bold mode.
2. Changing Vertical Speed
a. Using CVS
1) CVS Button - PRESS and BOLD.
2)
Airplane - Establish desired vertical speed.
3)
CVS Button - REI.BASE.
b. Using Vertical Trim Control
FAA Approved
Revision 4
1)
VERTICAL TRIM CONTROL - PRESS either up or
down to increase or decrease the vertical
speed. Displayed vertical speed changes 100
£pm for every second the control
is
held
down.
Piper Models PA-46-310P and PA-46-350P
Airplane Plight Manual Supplement
006-0428-01
Page 19
of
39