Piper Malibu PA-46-310P Pilot Operating Handbook page 345

BENDIX/KING
SECTION 4
NORMAL PROCEDURES
b) If the D-Bar is less than 2 to 3 dots:
the
BOG
mode will disengage upon
selecting BC mode; the BC and APR
annunciators will illuminate steady and
the capture/track sequence will
automatically begin.
9. Glideslope Coupling
NOTE
GLIDESLOPE COUPLING IS INHIBITED VHEN OPERATING IN NAVOR APR BC
MODES. GLIDESLOPE COUPLING OCCURS AUTOMATICALLY IN THE APR
MODE.
a.
APR
Mode -
ENGAGED.
b. At glideslope centering - HOTB GS annunciator ON.
NOTE
AUTOPILOT
CAN
CAPTURE GLIDESLOPE FROM ABOVE OR BELOV THE BEAM
VRILE OPERATING IN EITHER PITCH ATTITUDE HOLD OR ALT BOLD HODES.
I.....,)
10. Missed Approach
a.
A/P
DISC/TRIM
INTER
Switch - PRESS to disengage
AP and
YD.
b.
HISSED
APPROACH - EXECUTE.
c.' CVS Button - PRESS
(KFC 150 only) as desired to
activate
FD
mode during go-around maneuver.
d.
AP ENG
Button - PRESS (If AP and YD operation is
desired). Note AP and YD annunciators ON.
Piper Models PA-46-310P and PA-46-350P
Airplane Plight Manual Supplement
006-0428-01
Page 16 of 39
PAA
Approved
Revision 4
•