Piper Malibu PA-46-310P Pilot Operating Handbook page 342

•
0
BENDIX/KING
SBCl'ION 4
NORMAL PROCEDURES
b) If the D-Bar is less than 2 to 3 dots:
the BOG mode will disengage upon
selecting NAV mode; the NAV annunciator
will illuminate steady and the capture/
track sequence will automatically
begin.
7.
Approach (APR) Coupling
a. Vhen equipped with HSI
1) Course Bearing Pointer - SBT to desired
course •
NOTE
VHEN EQUIPPED VITH NAV 1/NAV 2 SVITCBING AND NAV 2 IS SELECTED,
SET OBS TO THE DESIRED COURSE.
2)
BEADING Selector Knob - SBT BUG to provide
desired intercept angle.
3)
APR Mode Selector Button - PRESS.
a) If the Course Deviation Bar is greater
than 2 to 3 dots: the aircraft will
continue in BOG mode (or wings level if
BOG not selected) with the APR
annunciator flashing; when the computed
capture point is reached the BOG mode
will disengage, the APR annunciator
will illuminate steady and the selected
course will be automatically captured
and tracked.
b) If the D-Bar is less than 2 to 3
dots: the HOG mode will disengage
upon selecting APR mode; the APR
annunciator will illuminate steady
and the capture/track sequence
will automatically begin.
b. Vhen equipped with DG
FAA Approved
Revision 4
1) OBS Knob - SELECf desired approach course.
2) APR Mode Selector Button - PRESS.
Piper Models PA-46-310P and PA-46-350P
Airplane Flight Manual Supplement
006-0428-01
Page
13
of 39