Piper Malibu PA-46-310P Pilot Operating Handbook page 349

BENDIX/KING
SECTION 4
NORMAL
PROCEDURES
**************************
VARNING
*****************************
llBBN OPERATING AT OR NEAR TBB BEST RATE OP CLIMB AlllSPEED AND
USING
VERTICAL SPEED BOLD, IT IS BASY TO DBCBLDATE TO
AN
AIR.SPEED ON TBB BACK SIDE OP THE POVER CURVE (A DECREASE IN
AIR.SPEED RESULTS IN A
REDUCED
RATE OP CLIMB). CONTINUED
OPERATION ON THE BACK SIDB OP TBB POVER CUR.VE IN VERTICAL SPEED
BOLD NODE VILL RESULT IN A STALL.
VBBN OPERATING AT OR NEAR TBB NAXIKUH AtrrOPILOT SPBBD, IT VILL
BB NBCBSSAR.Y TO REDUCE POVER IN ORDBR TO MAINTAIN TBB DBSIR.BD
RATE OP DBSCBN'1' AND NOT BXCIBD TBB NilIMUM AUTOPILOT SPBBD.
*''***''''''******'''''''''''''**'*'*'''''''*''''''''***'''''***
3. ALTITUDE PRESELECT
a. ALTITUDE SELECT knob - PUSH small knob to the "IN"
position.
*********'****************
VARNING
*****************************
VERIFY UNIT IS DISPLAYING ALTITUDE SELECT VINDOV PRIOR TO
INITIATING ANY CBANGB IN TBB SBLBCTBD ALTITUDE VALUE.
'''*****''**********'**'''''''*********'***'*************''*****
b. ALTITUDE SBLBCT knob -
ROTATE until
the desired
altitude is displayed.
c.
ALTITUDE SELECT
HOOE
(ARK)
button - PUSH to arm the
Altitude Select Mode.
d. Airplane - ESTABLISH ATl'ITUDB necessary to intercept
the selected altitude.
Piper Models PA-46-JlOP and PA-46-350P
Airplane Plight Manual Supplement
006-0428-01
Page
20 of 39
PAA Approved
Revision 4
•