Piper Malibu PA-46-310P Pilot Operating Handbook page 346

•
BENDIX/KING
NOTE
SECTION 4
NORMAL PROCEDURES
IF IT IS DESIRED TO TRACK THE ILS COURSE OUTBOUND AS PART OF THE
HISSED APPROACH PROCEDURE, USE THE NAV HOOE TO PREVENT
INADVERTANT GS COUPLING.
11.
Before Landing
a.
A/P DISC/TRIM INTBR Switch - PRESS to disengage
AP and YD .
C. FLIGHT DIRECTOR OPERATION (KFC
150
Systems Only)
The flight director modes of operation are the same as
those used for autopilot operations except the autopilot is
not engaged and the pilot must maneuver the aircraft to
satisfy the flight director commands.
D. YAV DAMPER OPERATION
1. Vith Yaw Damper Switch Installed.
a. Before Take off.
(1)
A/P DISC/TRIM INTER Switch - Press to
disengage AP and YD.
b. Yaw Damper Engagement
(1) YD Switch - PRESS. Note YD Annunciator on.
NOTE
YAV DAMPER ENGAGEMENT VILL OCCUR AUTOMATICALLY VITH AUTOPILOT
ENGAGEMENT. THE YAV DAMPER HAY BE DISENGAGED BY PRESSING THE YD
SVITCB.
c. Before Landing
FAA Approved
Revision 4
(1)
AP DISC/TRIM INTER Switch - Press to
disengage AP and YD.
Piper Models PA-46-JlOP and PA-46-350P
Airplane Flight Manual Supplement
006-0428-01
Page 17 of 39