Piper Malibu PA-46-310P Pilot Operating Handbook page 344

•
BENDIX/KING
SBCl'ION 4
NORMAL PROCEDURES
a) If the Course Deviation Bar is greater
than 2 to 3 dots:
the aircraft will
continue in HDG mode (or wings level if
HOG not selected) with BC annunciated
steady and APR annunciator flashing;
when the computed capture point is
reached the HDG will disengage, and the
BC and APR annunciators will illuminate
steady and the selected course will be
automatically captured and tracked.
b) If the D-Bar is less than 2 to 3 dots:
the HDG mode will disengage upon
selecting BC mode; the APR BC
annunciator will illuminate steady and
the capture/track sequence will
automatically begin.
b. Vhen equipped with DG
1)
OBS Knob - SBLBCT the ILS front course
inbound heading.
2) BC Mode Selector Button - PRESS.
3) Beading Selector Knob - ROTATE Bug to the
ILS front course inbound heading.
NOTE
VHEN BC IS SELECTED, THE LATERAL OPERATING MODE VILL CHANGE FROM
BDG (IF SELECTED) TO VINGS LEVEL FOR 5 SECONDS. A 45° INTERCEPT
ANGLE VILL THEN BE ESTABLISHED BASED ON THE POSITION OF THE BUG.
FAA
Approved
Revision 4
a) If the D-Bar is greater than 2 to 3
dots: the autopilot will annunciate
HDG (unless HDG not selected) and
BC
modes with APR flashing; when the
computed capture point is reached the
HDG annunciator will go out, the
BC
and
APR annunciators will illuminate steady
and the selected course will be
automatically captured and tracked.
Piper Models PA-46-310P and PA-46-350P
Airplane Plight Manual Supplement
006-0428-01
Page
15 of 39