Type S Sensor Unit General Specifications; Type B Sensor Unit General Specifications - Oval ALTI mass CA00A Instructions Manual

3.1.2 Type S sensor unit general specifications

Stainless steel tube type (CS010 to CS080)
●
Item
Model
Nominal flange size
Wetted parts
Materials
Housing
Process connection
Acceptable fluid
Density range
Measurable temperature range
Heatproof temperature
Max. operating pressure
Sensor housing withstands
Flow direction
Explosionproof configuration
Dusttight, waterproof configuration
NOTE ※1: Density range varies with the fluid used.
※2: Refer to section 10.4 for explosionproof specification.
In case of non-explosionproof type, the maximum measurement temperature is 130℃. However, the product
must be used within the maximum ambient temperature of 45℃.
※3: CIP/SIP procedures must be performed within the heatproof temperature range.
※: Temperature class for integral type is T4.
※: For products that are compliant with the High Pressure Gas Safety Act, consult OVAL.
Titanium tube type (CS010 to CSR50)
●
Item
Model
Nominal flange size
Wetted parts
Materials
Housing
Process connection
Acceptable fluid
Density range
Measurable temperature range
Heatproof temperature
Max. operating pressure
Sensor housing withstands
Flow direction
Explosionproof configuration
Dusttight, waterproof configuration
NOTE ※1: Loose flange is applied. Ferrule connections of models CS010 and CS015 comply with ISO2852.
※2: Density range varies with the fluid used.
Refer to section 10.4 for explosionproof specification.
※3:
In case of non-explosionproof models, the maximum measurement temperature of integrally mounted
type is 130℃. However, the product must be used within the maximum ambient temperature of 45℃.
※4: CIP/SIP procedures must be performed within the heatproof temperature range.
※: Temperature class for integral type is T4.
※: If polished wetted parts are desired, contact OVAL.

3.1.3 Type B sensor unit general specifications

Item
Model
Nominal flange size
Wetted parts
Materials
Housing
Process connection
Acceptable fluid
Density range
Measurable temperature range
Heatproof temperature
Max. operating pressure
Flow direction
Explosionproof configuration
Dusttight, waterproof configuration
NOTE ※1: Refer to section 10.4 for explosionproof specification.
In case of non-explosionproof model, up to 125℃ is permitted. However, the product must be used within
the maximum ambient temperature of 45℃.
※2: CIP/SIP procedures must be performed within the heatproof temperature range.
CS010 CS015
15mm or 1/2" 15mm or 1/2"
JIS 10, 20K RF / ASME (JPI) 150 RF, IDF ferrule
0.5 to 1.0g/mL, 0.7 to 1.3g/mL, 1.0 to 1.5g/mL (※1)
－40 to ＋130℃ for both integrally and separately mounted types (※2)
Varies according to process connection.
CS010 CS015
10mm or 1/2" 15mm or 1/2"
JIS 10, 20K / ASME (JPI) 150 / IDF ferrule (※1)
0.5 to 1.0g/mL, 0.7 to 1.3g/mL, 1.0 to 1.5g/mL (※2)
Varies according to process connection.
CB006 CB010
10mm 15mm
or 1/2" or 1/2"
JIS 10, 20, 30K / ASME (JPI) 150, 300, 600 RF, IDF ferrule
Varies according to process connection.
Description
CS025 CS040
25mm or 1" 40mm or 1 ・ 1/2"
SUS316L
SUS304
Liquid
150℃ max. (※3)
2.8MPa
Forward / Reverse
Refer to section 10.4
IP66 / 67
Description
CS025 CS040
25mm or 1" 40mm or 1 ・ 1/2"
SB338 Grade-9＋TB480H
SUS304
Liquid
－40 to ＋130℃ (※3)
150℃ max. (※4)
2.8MPa
Forward / Reverse
Refer to section 10.4
IP66 / 67
Description
CB015 CB025
15mm 25mm
or 1/2" or 1"
SUS316L
SUS304
Liquid
0.3 to 2.0g/mL
－
40 to ＋125° C (※1)
150℃ max. (※2)
Forward / Reverse
Refer to section 10.4
IP66 / 67
L -- 740 -- 28 -- E
CS050 CS080
50mm or 2" 80mm or 3"
CS050 CSR50
50mm or 2" 80mm or 3"
CB040 CB050
40mm 50mm
or 1 ・ 1/2" or 2"
11