Transition Chart Of View (3) - Oval ALTI mass CA00A Instructions Manual

L -- 740 -- 28 -- E

9.2.4 Transition chart of view (3)

： "SEL1" operation
MODE SELECT
： "SEL3" operation (For operating procedure, see 9.1.2 Switching operation.)
： "ENT" operation
1.Password & Disp
2.Setup
※1
3.Diag/Service
4.Maintenance
Exit
Process screen
NOTE: ※1：For this function, the setting change is disabled in Write Protect mode (refer to section 9.2).

1.Flow Param 1.Ana. Output1
2.Den Param
3.Temp Param
4.Outputs
2.Ana. Output2
3.Pls. Output1
4.Pls. Output2
5.Status Input 5.Status Output
6.H/L Alarm 6.Error Output
Exit Exit
1.Assign
2.URV
3.LRV
4.Lowcut
5.Added Damp
Exit
1.Assign
2.URV
3.LRV
4.Lowcut
5.Added Damp
Exit
1.Assign
2.Freq Factor
3.Rate Factor
4.Lowcut
Exit
1.Assign
2.Freq Factor
3.Rate Factor
4.Lowcut
Exit