Installing The Air Shroud - Dell EMC PowerEdge T340 DPJ1G Installation And Service Manual

Figure 24. Removing the air shroud
Next step
1 Replace the air shroud.

Installing the air shroud

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 If applicable, route the cables inside the system along the system wall and secure the cables by using the cable-securing bracket.
Steps
1 Align the tabs on the air shroud with the slots on the system.
2 Lower the air shroud into the system until it is firmly seated.
52 Installing and removing system components
Safety instructions.
Before working inside your system.