Table of Contents
Advertisement
Figure 21. Removing the air shroud
Next step
1
Install the air
shroud.
Installing the air shroud
Prerequisite
1
Follow the safety guidelines listed in
Steps
1
Insert the air shroud into the sled, aligning the shroud hinge with slot on the sled.
NOTE:
Ensure that both the SATA cables are routed through the air shroud cable guide slot behind the air shroud
latches.
NOTE:
Ensure that neither of the cables are pinched or pressed under the air shroud.
2
Press the air shroud until the locks click into place.
72
Installing and removing enclosure components
Safety
instructions.
Advertisement
Table of Contents
