Installing The Battery Cable; Installing The Rigging Grommet - Yamaha F225F Service Manual

RIG
GING
3. Route the extension wiring harness
through the bottom cowling.
4. Connect the extension wiring harness
coupler b, and then fasten the main
wiring harness coupler a using the
plastic tie c.
b

Installing the battery cable

1. Install the positive battery cable a and
negative battery cable b.
b
2. Install the rubber cap a.
3-9
Rigging information
c
a
c
a
a

Installing the rigging grommet

1. Route each harness through the proper
hole in the rigging grommet. See "Rig-
ging grommet description" (3-8).
2. Align the white tape a on the battery
cable with the outer end of the rigging
grommet.
3. Install the grommet holder a along with
the rigging grommet.
4. Install the rigging tube retainer b, and
then fasten it using the plastic tie c.
a
a
a