Yamaha F225F Service Manual page 335

u
t
v
Sheave holder v: 90890-01701
VCT cap u: 32 N·m (3.2 kgf·m, 23.6 ft·lb)
17. Check that the "II" marks g on the VCT
assembly (PORT) and driven sprocket
(PORT) are aligned.
PORT
18. Check that the "I" marks h on the VCT
assembly (STBD) and driven sprocket
(STBD) are aligned.
STBD
h
u
g
19. Turn the crankshaft
gradually until the large " " mark k on
the crankshaft is aligned with the rib m
on the cylinder block. NOTICE: Do not
turn the crankshaft clockwise more
than 60°. Otherwise, the pistons and
valves could collide with each other
and be damaged.
m
20. Install the cylinder head covers w and
x.
w
x
21. Install the spark plugs, and then tighten
them to the specified torque.
Spark plug: 28 N·m (2.8 kgf·m, 20.7 ft·lb)
22. Install the ignition coils.
Camshaft
clockwise 60°
0
1
k
2
3
60°
4
5
6
7
8
9
10
A
7-52