FUEL
Removing the intake silencer
1. Disconnect the air temperature sensor
coupler a.
a
2. Remove the blowby hose a.
3. Remove the intake silencer b and air
temperature sensor c.
4. Remove the plastic tie d, and then
remove the joint e.
b
c
e
d
6-15
Fuel system
a
Removing the intake manifold
1. Remove the caps a, and then remove
the PTT motor leads a.
2. Remove the PTT motor leads a from the
holder b.
a
3. Remove the fuel injector lead b and
thermoswitch lead c from the holders
c.
STBD
c
c
4. Remove the fuel injector lead d from the
holders d.
a
b
b