Wiring Harness; Removing The Wiring Harness - Yamaha F225F Service Manual

Removing the wiring harness

1. Disconnect the ignition coil couplers a,
engine ECM couplers b, and knock sen-
sor coupler c.
2. Remove the speed sensor coupler d,
joint connector e, and water pressure
sensor coupler f.
3. Remove the wiring harness a from the
holders b.
4. Remove the holders g from the engine
ECM bracket.
b
a
g
b
a
b
f
e c
5. Disconnect the cam position sensor
coupler (PORT EX) h.
h
h
6. Remove the condensers k.
7. Remove the wiring harness a from the
holders b and c.
8. Remove the holders g from the wiring
harness guide.
a
d g
b
a
k
9. Disconnect the OCV couplers m, cam
position sensor
thermoswitch connectors p.
PORT
m
p
STBD
n
10. Disconnect the oil pressure sensor
coupler r.
11. Remove the ground leads s.

Wiring harness

b
g
c
n,
couplers and
n
p
m
7-18
0
1
2
3
4
5
6
7
8
9
10
A