Installing The Oil Filter Bracket - Yamaha F225F Service Manual

POWR

Installing the oil filter bracket

Do not reuse a gasket or O-ring, always
replace it with a new one.
1. Install a new gasket a, the oil filter
bracket b, a new gasket c, the cover d,
and the holder e, and then tighten the oil
filter bracket bolts f and g to the speci-
fied torque in the order a, b, and so on.
a
b
f
g
g
a
f
f
d
g
c
g
Oil filter bracket bolt f and g:
12 N·m (1.2 kgf·m, 8.9 ft·lb)
2. Install the oil filter union bolt h, and then
tighten it to the specified torque.
3. Install a new O-ring i and the oil
pressure sensor j, and then tighten the
oil pressure sensor to the specified
torque.
7-69
Power unit
c
d
e
g
e
b
g
h
i
j
Oil filter union bolt h:
49 N·m (4.9 kgf·m, 36.1 ft·lb)
Oil pressure sensor j:
13 N·m (1.3 kgf·m, 9.6 ft·lb)
4. Add a small amount of engine oil through
the oil passage a of the oil filter bracket.
5. Install the oil filter k, and then tighten it
to the specified torque.
l
k
Oil filter wrench l: 90890-06830
Oil filter k: 18 N·m (1.8 kgf·m, 13.3 ft·lb)
a
k