Uncrating Procedure - Yamaha F225F Service Manual

RIG
GING

Uncrating procedure

1. Check the crate for shipping damage.
2. Remove the top cover.
3. Remove all of the bolts from the bottom
plate, and then remove the frame.
NOTICE: Be careful not to damage
the outboard motor.
4. Remove the wrapping, and then check
the outboard
damage.
5. Remove the top cowling, and then
remove the flywheel magnet cover a.
a
6. Install the special service tool b to the
flywheel magnet. NOTICE: When lifting
the outboard motor, make sure to use
the specified special service tool.
Other bolts and hanging jigs could
bend or break, causing the outboard
motor to fall.
b
Engine lifting eye b: 90890-06820
7. Install the lifting harness to the eye bolt
a.
8. Tension the lifting harness.
3-5
Rigging information
motor for concealed
a
9. Lift up the outboard motor along with the
bottom plate c carefully. NOTICE: Make
sure that the lifting harness does not
damage any parts of the outboard
motor.
c
10. Remove the clamp bracket bolts d.
d
11. Remove the steering retainer, and then
install a hydraulic steering cylinder
following the recommendation of the
manufacturer.