Shimming; Shim Location - Yamaha F225F Service Manual

LOWR

Shimming

• Before selecting the forward gear shim (T2) and reverse gear shims (T1), make sure to select the
pinion shims (T3).
• When assembling the lower unit to measure the backlash after selecting the pinion shims (T3), do
not apply gear oil, grease, or sealant to the parts.
• When assembling the lower unit after shimming is completed, make sure to apply gear oil, grease,
and sealant to the specified areas.

Shim location

T3
T1
8-87
Lower unit
T4
T2