Yamaha F225F Service Manual page 500

BRKT
g
g
4. Install a new gasket h, the exhaust
manifold i, and a new rubber seal j,
and then tighten the exhaust manifold
bolts k temporarily.
5. Tighten the exhaust manifold bolts k to
the specified torque, and then tighten the
oil pan bolts g to the specified torque.
g
Exhaust manifold bolt k:
20 N·m (2.0 kgf·m, 14.8 ft·lb)
Oil pan bolt g:
20 N·m (2.0 kgf·m, 14.8 ft·lb)
6. Install the dowels l, a new gasket m,
the plate n, a new gasket o, and the
muffler p, and then tighten the muffler
bolts q to the specified torque.
7. Install the rubber seal r and water pipe
s.
9-21
Bracket unit
f
j
k
i
h
g
g
g
l
g
Muffler bolt q:
20 N·m (2.0 kgf·m, 14.8 ft·lb)
k
p
q
s
q
r
q
q
q
o
n
m