Yamaha F225F Service Manual page 492

BRKT
a
3. Install the washers j and lower mounts
k and l to the lower mounting bolts m.
4. Install the lower mount brackets n, and
then tighten the lower mount bracket
bolts o temporarily.
l
k
k l k j
TIP:
The ground lead should be installed on the
same side as originally installed.
5. Install the upper case assembly b to the
bracket assembly c.
6. Install the upper mounting nuts p,
washers q and r, and lower mounting
nuts s, and then tighten the upper
mounting nuts p and lower mounting
s
nuts to
NOTICE: When tightening the lower
mounting nut, make sure that the
ground lead does not turn along with
the bolt.
9-13
Bracket unit
i
i
g
j
m
k
n
o
m
the specified torque.
p
h
c
s
r
Upper mounting nut p:
72 N·m (7.2 kgf·m, 53.1 ft·lb)
Lower mounting nut s:
72 N·m (7.2 kgf·m, 53.1 ft·lb)
7. Tighten the upper mount bracket bolts i
to the specified torque in the order a, b,
and so on.
i
Upper mount bracket bolt i:
55 N·m (5.5 kgf·m, 40.6 ft·lb)
8. Tighten the lower mount bracket bolts o
to the specified torque.
9. Connect the ground lead t.
10. Install the speedometer hose u, and
then connect it to the speedometer hose
adapter v.
q
q
s r
b a
b
c