Yamaha F225F Service Manual page 495

Disassembling the upper case
1. Remove the drain bolt a, gasket b,
cover c, and damper d.
d
c
b
a
2. Remove the anodes e.
3. Remove the oil pan assembly a and
dowels f.
4. Remove the rubber seals g, h, and i.
f
5. Remove the circlip j.
j
6. Remove the drive shaft bushing k.
e
e
a
g
h
i
m
l
k
Bearing puller assembly l: 90890-06535
Stopper guide plate m: 90890-06501
Checking the exhaust guide anode
1. Check the anode. Replace if eroded.
Clean if there is grease, oil, or scales.
NOTICE: Do not apply grease, oil, or
paint to the anode.
Checking the drive shaft bushing
1. Check the drive shaft bushing. Replace if
cracked or worn.
Assembling the upper case
Do not reuse a gasket, always replace it
with a new one.
1. Install the bushing a.
c
b
a
a
Upper case
c
b
9-16
0
1
2
3
4
5
6
7
8
9
10
A