Yamaha F225F Service Manual page 104

RIG
GING
2. Push the unlock button a of the
transmitter. The buzzer of the receiver
will sound 2 short beeps.
3. Turn the engine start switch to ON. The
buzzer of the receiver will sound 1
medium beep.
4. Turn the engine start switch to OFF. Initial
registration is
unlocked.
5. Push the lock button b of the transmitter.
Check that the buzzer of the receiver will
sound 1 short beep.
6. Turn the engine start switch to ON.
A
c
3-13
Rigging information
a
complete. Y-COP
b
B
d
A 6Y9 Multifunction Color Gauge
B 6Y8 Multifunction Meter
TIP:
• If the outboard motor is equipped with the
6Y9 Multifunction Color Gauge, Y-COP
mark c is displayed on the gauge when the
engine start switch is turned to ON.
• If the outboard motor is equipped with the
is
6Y8 Multifunction Meter, "–" mark d is dis-
played on the tachometer when the engine
start switch is turned to ON.
7. Push the unlock button a of the
transmitter. Check that the buzzer of the
receiver will sound 2 short beeps.
A
c
a