Removing the upper case
1. Drain the remaining engine oil.
2. Disconnect the ground lead a and
speedometer hose b, and then remove
the adapter c.
3. Loosen the lower mount bracket bolts d.
c
b
a
4. Loosen the upper mount bracket bolts e.
5. Remove the upper mounting nuts f and
lower mounting nuts g, and then remove
the upper case assembly a.
f
g
g
d
c
b
a
e
a
Upper case and mount
6. Remove the upper mount bracket bolts
e, upper mount bracket h, damper i,
upper mounts j, plates k, stopper l,
collars m, plate n, and upper mounting
bolts o.
o
n
m
l
k
j
7. Remove the lower mount bracket bolts
d, lower mount brackets p, lower
mounts q and r, lower mounting bolts
s, and washers t.
q
r
Installing the upper case
1. Install the plate a, collars b, stopper c,
plate d, and upper mounts e to the
upper mounting bolts f.
a
b
c
e
d
e
2. Install the damper g, upper mount
assembly a, and upper mount bracket
h, and then tighten the upper mount
bracket bolts i temporarily.
e
i
o
h
t
s
r
p
d
f
f
b
9-12
0
1
2
3
4
5
6
7
8
9
10
A