FUEL
2. Apply positive pressure and check that
air comes out of the opposite end of the
canister
check
canister check valve if no air comes out.
Vacuum/pressure pump gauge set a:
90890-06756
3. Connect the special service tool a to the
opposite canister check valve port.
4. Apply positive pressure and check that
no air comes out of the opposite end of
the canister check valve. Replace the
canister check valve if air comes out.
Installing the canister
1. Install the canister a.
6-27
Fuel system
valve.
Replace
a
a
a
2. Connect the vapor gas hoses b, c, d,
e, and f to the joint g and check
valves h.
the
3. Fasten the vapor gas hoses a using the
holders i.
4. Connect the vapor gas hoses b, j, and
k to the canister.
5. Connect the vapor gas hose f to the
bottom cowling.
d
h
f
e
c
g
a
i
b
i