Yamaha F225F Service Manual page 522

BRKT
e
Depth b (reference data):
0.95 mm (0.04 in)
5. Push the brushes b into the holders,
and then install the armature f.
b
b
6. Install the wave washer g.
g
7. Install the stator h.
9-43
Bracket unit
b
e
f
Installing the reservoir
Do not reuse an O-ring, always replace it
with a new one.
1. Install the spacer a, filter b, and sheet
c.
2. Install a new O-ring d and the reservoir
e, and then tighten the reservoir
mounting bolts f to the specified torque.
3. Install a new O-ring g and the reservoir
cap h, and then tighten the reservoir cap
h to the specified torque.
f
e
f
f
g
h
d
Reservoir mounting bolt f:
19 N·m (1.9 kgf·m, 14.0 ft·lb)
Reservoir cap h:
7 N·m (0.7 kgf·m, 5.2 ft·lb)
Installing the PTT motor
1. Install the joint a.
h
c
b
a