Yamaha F225F Service Manual page 252

FUEL
PORT
d
c
e
e
c
3. Tighten the intake manifold bolts d to
the specified torque in 2 stages and in
the order a, b, and so on.
STBD
c
d a
b
d
Intake manifold bolt d (M8):
1st: 24 N·m (2.4 kgf·m, 17.7 ft·lb)
2nd: 24 N·m (2.4 kgf·m, 17.7 ft·lb)
TIP:
Tighten the intake manifold bolts d to the
same torque in both stages.
6-17
Fuel system
STBD
PORT
c
d
a
b
d
4. Tighten the intake manifold bolts e to
the specified torque in 2 stages and in
the order a, b, and so on.
PORT
e
Intake manifold bolt e (M6):
1st: 11 N·m (1.1 kgf·m, 8.1 ft·lb)
2nd: 11 N·m (1.1 kgf·m, 8.1 ft·lb)
TIP:
Tighten the intake manifold bolts e to the
same torque in both stages.
5. Fasten the main wiring harness c using
the holders f.
d
c
6. Fasten the fuel injector lead d using the
holders g.
STBD
d e
b
c
b
a
e
e
a
d
c
f