Led Status Displays - Leuze electronic AMS 348i Manual

Display and control panel AMS 348i
Position value
The measured position value is displayed in the configured unit of measurement.
+87.000 m
+87.0 in
8.2.2

LED status displays

PWR LED
Off
Flashing green
Green continuous light
Red flashing
Red continuous light
Orange flashing
39
With the metric setting, the measurement value is always displayed in meters
with three decimal places.
With the inch setting, the measurement value is always displayed in inches
with one decimal place.
Device OFF
- No supply voltage
Power LED flashes green
- No measurement value output
- Voltage connected
- Self test running
- Initialization running
- Parameter download running
- Boot process running
Power LED green
- AMS 348i ok
- Measurement value output
- Self test successfully finished
- Device monitoring active
Power LED flashes red
- Device ok but warning message (ATT, TMP, LSR)
set in display
- Light beam interruption
- Plausibility error (PLB)
Power LED red
- No measurement value output; for details, see Display
Power LED flashes orange
- PROFINET wave function
AMS 348i Leuze electronic