Leuze electronic AMS 348i Manual page 72

PROFINET interface
9.9.3.17 Module 2: Static preset
PROFINET module identifier
Module-ID
Submodule-ID
Description
With this module, a preset value can be specified. The specified preset value becomes active
in the position in which preset teaching is performed.
Notice!
In the event of a device change the preset value is retained in the PROFINET manager. The
activation of the preset value (preset teach) at the intended position must, however, be
performed again.
Parameters
Parameter Description
Preset value.
a
The value is accepted during a corre-
sponding teach event (see output data).
The resolution of the preset value is
Preset
independent of the resolution selected in
module 1.
Parameter length: 4 bytes
Input data
None
Output data
Output data Description
b
Read in the preset value.
Preset teach
c
Preset value is deactivated.
Preset reset
Output data length: 1 byte
69
1002
1
Rel. Data Value
addr. type
sign
0 -999999 ... +999999
32 bit
Rel. Data Value
addr. type
0.0 Bit 01 Preset teach
0.1 Bit 01 Preset reset
AMS 348i
Default Unit CR to
module
metr. Inch
2b
0 mm in/100 4d
5d
Default Unit CR to
module
metr. Inch
4d
– –
5d
4d
– –
5d
Leuze electronic