11.4.5 Accessory Ready-Made Cables For Profinet - Leuze electronic AMS 348i Manual

11.4.5 Accessory ready-made cables for PROFINET

General
• Cable KB ET... for connecting to PROFINET via M 12 connector
• Standard cable available in lengths from 2 ... 30 m
• Special cables on request.
Contact assignments M 12 PROFINET connection cable KB ET ...-SA
EtherNet
TD
SH
M 12 connector
(D-coded)
Accessories M 12 PROFINET connection cable, open cable end
Cable designation: KB ET - ... - SA
Accessories PROFINET connection cable with both-sided D-coded M 12 plug
Cable designation: KB ET - ... - SSA, cable assignment 1:1, not crossed
Accessories PROFINET connection cable, M 12-/RJ45
Cable designation: KB ET - ... - SA-RJ45
Notice for connecting the PROFINET interface!
The entire connection cable must be shielded. The shielding connection must be at the same
potential on both ends of the data line. This prevents potential compensating currents over
the shield and possible interference coupling by compensating currents. The signal lines
must be stranded in pairs.
Use CAT 5 cable for the connection.
Leuze electronic
M12 PROFINET connection cable (4-pin connector, D-coded, on both sides)
Pin
RD+
TD+
RD
SH (thread)
Wire colors
WH
YE
BU
OG
Conductor class: VDE 0295, EN 60228, IEC 60228 (Class 5)

Type overview and accessories
Name
1 TD+
2 RD+
3 TD-
4 RD-
FE
AMS 348i
Core color
yellow
white
orange
blue
bare
100