Specifications Of The Self-Adhesive Foil; Specifications Of The Reflective Tape On A Metal Plate - Leuze electronic AMS 348i Manual

Reflectors
6.2.1

Specifications of the self-adhesive foil

Type designation
Part no.
Foil size
Recommended
application temperature
for adhesive tape
Temperature resistance,
affixed
Mounting surface
Cutting the tape
Cleaning
Storing the foil
6.2.2

Specifications of the reflective tape on a metal plate

The reflective tape is affixed to a metal plate. Included with the metal plate are spacers for
positioning at an incline - for avoiding surface reflections - (see chapter 6.4.2 "Mounting the
reflector").
Type designation
Part no.
Foil size
Outer dimensions of the
metal plate
Weight
Cleaning
Storing the reflector
25
Reflective tape
200x200-S
50104361
200 x 200 mm
The mounting surface must be clean, dry and free of grease.
Cut with a sharp tool, always on the side of the prism structure.
Do not use any agents that act with a grinding effect. A conventional household
detergent can be used as a cleaning agent. Rinse with clear water and dry the
Reflective tape
200x200-M
50104364
200 x 200 mm
250 x 250 mm
0.8 kg
Do not use any agents that act with a grinding effect. A conventional household
detergent can be used as a cleaning agent. Rinse with clear water and dry the
AMS 348i
Part
Reflective tape
500x500-S
50104362
500 x 500 mm
+5 °C ... +25 °C
-40 °C ... +80 °C
surface.
Store in a cool and dry place.
Part
Reflective tape
500x500-M
50104365
500 x 500 mm
550 x 550 mm
4 kg
surface.
Store in a cool and dry place.
Reflective tape
914x914-S
50108988
914 x 914 mm
Reflective tape
914x914-M
50104366
914 x 914 mm
964 x 964 mm
25 kg
Leuze electronic