Working Safely - Leuze electronic AMS 348i Manual

2.4

Working safely

Attention!
Access to or changes on the device, except where expressly described in this operating
manual, are not authorized.
The device must not be opened. Failure to comply will render the guarantee void. Warranted
features cannot be guaranteed after the device has been opened.
Safety regulations
Observe the locally applicable legal regulations and the rules of the employer's liability
insurance association.
Attention!
The AMS 348i... is not a safety module acc. to EU machinery directives.
Qualified personnel
Mounting, commissioning and maintenance of the device must only be carried out by
qualified personnel. Electrical work must be carried out by a certified electrician.
Attention, laser radiation!
The AMS 348i operates with a red light laser of class 2 acc. to EN 60825-1. If you look
into the beam path over a longer time period, the retina of your eye may be damaged!
Never look directly into the beam path!
Do not point the laser beam of the AMS 348i at persons!
When mounting and aligning the AMS 348i, avoid reflections of the laser beam off of
reflective surfaces!
Heed the laser safety regulations according to DIN EN 60825-1 in their most current
version! The output power of the laser beam at the reading window is at most 4.0 mW
acc. to EN 60825-1. The average laser power is less than 1 mW in accordance with laser
class 2 as well as CDRH class 2.
The AMS 348i
emitted wavelength of 650 ... 690 nm.
Attention!
CAUTION! The use of operating and adjusting devices other than those specified here
or carrying out of differing procedures may lead to dangerous exposure to radiation.
Leuze electronic

uses a laser diode with low power in the visible red light range with an
AMS 348i
Safety notices
8