Leuze electronic AMS 348i Manual page 60

PROFINET interface
The GSDML file can support an arbitrary number of languages in one file. Every GSDML file
contains a version of the AMS
File name structure
The file name of the GSD file is constructed according to the following rule:
GSDML-[GSDML schema version]-Leuze-AMS348i-[date].xml
Explanation:
• GSDML schema version: 
Version identifier of the GSDML schema version used, e.g., V2.2.
• Date: 
Release date of the GSD file in the format yyyymmdd. 
This date doubles as the version identifier of the file.
Example:
GSDML-V2.2-Leuze-AMS348i-20090503.xml
You can find the GSD file at
www.leuze.com -> Download -> identify -> Optical distance measuring and positioning.
All data in modules required for operating the AMS
input and output data and device parameters for the functioning of the AMS
definition of the control and status bits.
If parameters are changed, e.g., in the project tool, these changes are stored on the PLC
side in the project, not in the GSD file. The GSD file is a certified and integral part of the
device and must not be changed manually. The file is not changed by the system either.
The functionality of the AMS
their functions are structured in the GSD file using module. A user-specific configuration
tool is used during PLC program creation to integrate the required modules and configure
them appropriately for their respective use. During operation of the AMS
PROFINET, all parameters are set to default values. If these parameters are not changed
by the user, the device functions with the default settings delivered by Leuze electronic.
For the default settings of the AMS 348i, please refer to the following module descriptions.
57
348i device model. This is also reflected in the file name.
348i is defined via GSD parameter sets. The parameters and
AMS 348i
348i is described in this file. These are
348i and the
348i on the
Leuze electronic