Leuze electronic AMS 348i Manual page 49

I/O submenu
Table 8.4:
Level 3
I/O 1
I/O 2
Limit values
Leuze electronic
I/O submenu
Level 4 Level 5 Selection/configuration option
Description
Port config- Input/Output
uration Defines whether I/O 1 functions as an output or input.
Switching Function No function/preset teach/laser ON/OFF
input
Activation Low active/High active
Switching Function Pos. limit value 1 / Pos. limit value 2 / Velocity / Intensity (ATT) /
output Temp. (TMP) / Laser (LSR) / Plausibility (PLB) / Hardware (ERR)
The individual functions are "ORed" on the selected switching
output.
Activation Low active/High active
Port config- Input/Output
uration Defines whether I/O 2 functions as an output or input.
Switching Function No function/preset teach/laser ON/OFF
input
Activation Low active/High active
Switching Function Pos. limit value 1 / Pos. limit value 2 / Velocity / Intensity (ATT) /
output Temp. (TMP) / Laser (LSR) / Plausibility (PLB) / Hardware (ERR)
The individual functions are "ORed" on the selected switching
output.
Activation Low active/High active
Upper pos. Activation ON / OFF
limit 1
Limit value Value input in mm or inch/100
input
Lower pos. Activation ON / OFF
limit 1
Limit value Value input in mm or inch/100
input
Upper pos. Activation ON / OFF
limit 2
Limit value Value input in mm or inch/100
input
Lower pos. Activation ON / OFF
limit 2
Limit value Value input in mm or inch/100
input
Display and control panel AMS 348i
AMS 348i
Standard
Output
No function
Low active
Plausibility (PLB),
hardware (ERR)
Low active
Output
No function
Low active
Intensity (ATT),
Temp. (TMP),
Laser (LSR)
Low active
OFF
0
OFF
0
OFF
0
OFF
0
46