Leuze electronic AMS 348i Manual page 63

PROFINET interface
Notice!
All AMS 348i participants in a PROFINET network must be located in the same subnet!
Device naming
The so-called "device naming" under PROFINET is understood as the unique assignment
of the device name from the PLC program generation (see step 3) to the PROFINET
participant mounted in the system. The device name is linked to the MAC ID of the mounted
PROFINET participant.
It is mandatory that the device name corresponds to the device name assigned in hardware
configuration (step 3).
 Under "Target systems", select item "Edit Ethernet participant".
 Click "Search" to scan the connected PROFINET network for MAC addresses.
Figure 9.13: Scan the PROFINET network for connected devices (MAC addresses)
Leuze electronic AMS 348i 60