Parameter Menu - Leuze electronic AMS 348i Manual

8.3.2

Parameter menu

Parameter handling submenu
The following functions can be called up in the Parameter handling submenu:
• Lock and enable parameter entry
• Set up a password
• Reset the AMS
Table 8.1:
Level 3
Parameter
enabling
Password
Parameters to
default
Additional important information on parameter handling can be found at the end of the
chapter.
PROFINET submenu
Table 8.2:
Level 3
Activation
Leuze electronic
348i to default settings.
Parameter handling submenu
Level 4 Level 5 Selection/configuration option
Description
ON / OFF
The standard setting (OFF) prevents unintended parameter changes.
With parameter enabling activated (ON), the display is inverted. In this
state, it is possible to change parameters manually. As long as parameter
enabling is activated, the AMS 348 is disconnected from the PROFINET.
Activate ON / OFF
password To enter a password, parameter enabling must be activated.
If a password is assigned, changes to the AMS 348 can only be made
after the password is entered.
The master password 2301 bridges the individually set password.
Password Configuration option of a four-digit numerical password.
entry
By pressing the enter button
Parameters to default, all parameters are reset to their
standard settings without any further security prompts.
In this case, English is selected as the display language.
PROFINET submenu
Level 4 Level 5 Selection/configuration option
Description
ON / OFF
Activates or deactivates the AMS 348 as an PROFINET participant.
If the AMS 348 is deactivated as a PROFINET participant, all subsequent
participants connected via the internal switch (Bus OUT) continue to be
active.
Display and control panel AMS 348i
after selecting
AMS 348i
Standard
OFF
OFF
Standard
ON
44